





Made In India SKYBIT SKY-LRS RX 2.4GHz True Diversity Long-Range Drone Receiver
Non-returnable
₹5,354.00
Out of stock
The SKYBIT SKY-LRS RX is an ultra-lightweight 3g, 2.4GHz true diversity long-range drone receiver powered by a 72MHz STM32 MCU. Featuring ExpressLRS firmware up to v3.6, full MAVLink/CRSF telemetry, 8km range, and 333Hz packet rates, it delivers low-latency, interference-free control for defense, commercial, and enterprise UAVs.
Choose Quantity
Product Details
Features
True Hardware Diversity: Dual antennas eliminate signal polarization loss for stable 8km range.
Native MAVLink Telemetry: Streams full bi-directional autopilot data directly to Ground Control Stations.
High-Speed 333Hz Link: Fast packet refresh rate ensures ultra-low control latency and response.
Non-Chinese IDDM Hardware: Designed and manufactured in India for defense and commercial compliance.
Multi-Flight Stack Support: Fully compatible with ArduPilot, PX4, Betaflight, and INAV flight controllers.
Technical Details
Processor (MCU): STM32 Core running at 72 MHz
Operating Frequency & Band: 2.4 GHz ISM band (High refresh rate, low latency)
RF Modulation: LoRa and FLRSC
Receiver Architecture: True Diversity (Dual independent RF receiving paths)
Operating Range: Up to 8 km line-of-sight
Control Protocols: MAVLink, CRSF, and S-Bus
Firmware Platform: ExpressLRS (ELRS) pre-installed, supporting firmware up to version 3.6
Telemetry Support: Full CRSF Telemetry, Native MAVLink, RSSI, Link Quality (LQ), SNR, and Uplink/Downlink Packet Rates
Telemetry RF Output Power: 10 mW
Input Voltage: 5 V DC
Power Consumption: 60 mA – 120 mA (typical)
Logic Voltage Levels: 3.3V TTL (UART TX/RX)
Antenna Interface: Dual IPEX / U.FL connectors (or ceramic antenna, model dependent)
Operating Temperature: -10°C to +60°C
Board Dimensions: 30 mm × 27 mm
Weight: 3.0 g (bare board, without antennas)
Compliance: Non-Chinese hardware, compliant for defense, industrial, and government UAS applications (IDDM Make-in-India)
Additional Details
Manufacturer: Griffyn AI Lab
Brand: SKYBIT™
Generic Name: UAV Radio Control Receiver / Long-Range Telemetry RX
Sold By: UAV Marketplace
Ideal For: Commercial inspection drones, agricultural UAVs, tactical defense drones, autonomous fixed-wings, long-range mapping platforms, and ArduPilot/PX4 enterprise systems.
Package Details:
1× SKYBIT SKY-LRS RX 2.4GHz Receiver Board
Frequently Asked Questions (FAQs)
Question 1: How do I put the SKYBIT SKY-LRS RX into bind mode manually?
Answer: Power on the receiver, then press the onboard tactile button five times within 3 seconds. The status LED will transition from a slow blink to a fast red blink, indicating it is in bind mode. Select the [BIND] option in your transmitter’s ExpressLRS Lua script; upon successful binding, the LED turns solid red.
Question 2: What are the recommended transmitter settings for optimal MAVLink telemetry?
Answer: In your radio's ExpressLRS menu, verify that your transmitter module is running ELRS v3.5.5 or higher. Set the Packet Rate to 333 Hz, Telemetry Ratio to 1:2, Switch Mode to 16ch Rate/2, and Link Mode to MavLink. Under Other Devices > SKYBIT RX 2.4G, set Protocol to MAVLink, SBUS Failsafe to No Pulses, and Bind Storage to Persistent.
Question 3: What do the onboard LED light patterns indicate?
Answer: A slow blink indicates the receiver is searching for an existing bound transmitter. A fast blink confirms the receiver is in active binding mode. A solid red light indicates a stable, active digital connection with the transmitter.




