UAV MARKETPLACE
UAV MARKETPLACE
0
0
GNB 850mAh 4S1P 14.8V 80C Lipo Battery
GNB 850mAh 4S1P 14.8V 80C Lipo Battery
GNB 850mAh 4S1P 14.8V 80C Lipo Battery
GNB 850mAh 4S1P 14.8V 80C Lipo Battery
GNB 850mAh 4S LiPo with XT30 Connector Detail

GNB 850mAh 4S 14.8V 80C/160C LiPo Battery - High Discharge FPV Micro Racing Pack

₹1,359.00
Out of stock
The GNB 850mAh 4S 80C is a high-discharge Lithium Polymer battery engineered for high-performance micro-FPV drones. With an 80C continuous discharge rate and 160C burst, it provides the instantaneous current required for rapid punch-outs and sharp maneuvers. Its compact 4S1P configuration makes it the ideal power source for CineLog25, Babyhawk, and custom 3-inch toothpick builds.
Choose Quantity
Request Quote
Product Details
Key Technical Advantages:

Explosive 160C Burst: While the 80C continuous rate handles standard flight, the 160C burst capability allows for split-second recoveries and massive vertical climbs without the battery "bottoming out."

Lightweight Agility: At approximately 102g, this battery provides the extra flight time of an 850mAh capacity without the weight penalty of larger 1100mAh packs, keeping your 3-inch quad feeling agile.

Durable Square Form Factor: The shorter, wider "square" design is more crash-resistant than traditional long-type batteries and fits perfectly on the top or bottom plates of Cinewhoops and Toothpick frames.

High-Grade XT30 Connector: Equipped with a genuine XT30 connector (standard) to handle high current draw while maintaining a micro footprint.

Fast Charge Ready: Supports up to 5C charge rates, allowing you to get back in the air in under 15 minutes when using a high-quality smart charger.

FAQ: Top 5 Questions on GNB 850mAh 4S

Q1: What is the typical flight time with a GNB 850mAh 4S battery?

A: On a standard 3-inch toothpick quad, you can expect 4 to 6 minutes of aggressive freestyle. For a Cinewhoop (like the Cinelog25) carrying a GoPro Bones or Naked Hero, flight times are typically 3 to 4.5 minutes.

Q2: Can I charge this battery at 5C (4.25A) every time?

A: While the battery supports up to 5C, we recommend a 1C (0.85A) or 2C (1.7A) charge rate for daily use. Constant 5C charging will significantly shorten the total cycle life of the battery.

Q3: Does this battery fit the DJI FPV (original) or Beta95X?

A: It is a perfect fit for the Beta95X V3 and similar 2.5-inch quads. However, it is not compatible with the large, proprietary DJI FPV drone, but it is widely used for DIY drones built with the DJI O3 Air Unit.

Q4: What is the minimum voltage I should fly down to?

A: To ensure battery longevity, do not land below 3.5V per cell (14.0V total). Landing at 3.7V per cell (storage voltage) is the best way to ensure your battery lasts for 200+ cycles.

Q5: Is the XT30 connector enough for an 80C burst?

A: Yes. The XT30 is rated for 30A continuous and up to 60A bursts. For an 850mAh pack, the 80C continuous draw is roughly 68A, which is right at the limit of the XT30. If your motor setup regularly pulls more than 60A, consider the XT60 version.

Expert Guide Question:

Are you using this for a Cinelog series or a freestyle toothpick? Depending on your setup, I can recommend the exact XT30 to XT60 adapter or a lighter 650mAh variant if you are looking to shave off another 20 grams for racing.

Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Added to cart
Your cart has item(s).
- Can't add this product to the cart now. Please try again later.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.