GNB 550mAh 3S1P 11.1V 90C Long Lipo Battery - High Voltage Pack for Toothpick FPV Whoops

The GNB 550mAh 3S1P 11.1V 90C Long Type Lipo Battery is the premium choice for micro multirotor pilots seeking the ultimate high-voltage response without packing on bulky airframe weight.

Punchy 90C Micro Discharge Capability :

Built with high-energy-density lithium polymer cells, this 3S pack easily sustains a 90C continuous discharge rate. It handles short-duration bursts up to 180C effortlessly, giving micro pilots massive vertical punch-out potential and swift recovery authority during sharp freestyle tracking runs.

Specialized Elongated Form Factor :

The "Long Type" thin layout is custom-tailored to minimize physical air profile resistance. It slides cleanly under skinny toothpick baseplates, mounts flush onto micro custom carbon designs, and helps lower the overall center of gravity to optimize tight roll and pitch axis response loops.

Low-Resistance XT30 Power Linkage :

To eliminate electrical flow bottlenecks common with smaller micro plugs, this pack is built with flexible 20AWG high-flex silicone wire and an authentic XT30 connector. This ensures rapid power delivery to your performance brushless motors while running significantly cooler.

Target Micro Flying Layouts :

An excellent primary upgrade option for performance multirotors, including:

• 2-inch to 3-inch lightweight toothpick style drones and high-KV freestyle frames

• Upgraded high-power 75mm–85mm brushless indoor whoop configurations

• Lightweight scale RC micro park flyers and custom 3S indoor vector planes

Specification :

• Brand: Gaoneng (GNB)

• Battery Type: Lithium Polymer (LiPo)

• Configuration: 3S1P / 3 Cells / 11.1V

• Nominal Capacity: 550mAh

• Continuous Discharge Rate: 90C

• Burst Discharge Rate: 180C

• Discharge Connector: XT30

• Balance Connector: JST-XH (4P)

• Discharge Wire Gauge: 20AWG High-Flex Silicone

• Dimensions: 16mm x 18mm x 71mm (H x W x L)

• Net Weight: 44g (+/- 2g)

• Charge Rate: 1C to 3C recommended (5C max fast charge)

• Cycle Life: 300+ times

Frequently Asked Questions :

Q1: Can I use this 3S 11.1V battery on a standard 1S or 2S tiny whoop?

Ans: No, this is an 11.1V 3S pack. Before plugging this in, you must verify that your drone's AIO flight controller, onboard ESCs, and brushless motors are specifically rated to support 3S voltage inputs, otherwise your electronics could burn out instantly.

Q2: What charging settings should I select for this 550mAh 3S pack?

Ans: For long-term health, balance charge this pack at a 1C rate (0.55A). If you are in a rush at the flying field, you can safely step up your smart charger’s rate to 2C or 3C (1.1A to 1.65A) using its standard 3S JST-XH balance plug loop.

Q3: How does the "Long Type" body shape benefit my micro drone setup?

Ans: The slim, extended block dimensions (16mm x 18mm x 71mm) spread the cell mass evenly down the center frame line. This lowers physical aerodynamic drag profile while preventing your battery pack from sticking far out past the side edges of narrow micro plates.

Q4: At what resting voltage should I place this battery into long-term storage?

Ans: If you don't plan to fly for more than 48 hours, use your balance charger to put the pack into a storage charge state at 3.80V to 3.85V per cell (approx. 11.4V total) to prevent internal chemistry degradation or swelling.