Gemfan 3018 Hurricane PC 2-Blade Propellers - 3 Inch Ultra-Efficient Toothpick Props (4L4R Set - 8pcs)
The Gemfan 3018 Hurricane 2-blade series is the premier choice for ultralight 3-inch builds.Featuring a 1.8" pitch and weighing only 0.8g per blade, these propellers are designed to minimize motor load and maximize battery life. Available in 1.5mm and 2mm shaft configurations, they are the standard for "Toothpick" drones and 1S/2S micro long-range platforms.
In the 2026 FPV ecosystem, efficiency is king for sub-250g categories. The Hurricane 3018-2 addresses this by offering a low-load aerodynamic profile that allows small motors (like 1103, 1204, or 1303) to operate in their most efficient RPM band.
Key Technical Advantages:
2-Blade Efficiency: By reducing rotational drag compared to tri-blade props, the 3018-2 can increase flight times by 15–20%. This is essential for Micro Long-Range quads like the Rekon 3 or custom 1S Li-ion cruisers.
Responsive 1.8" Pitch: The 1.8" pitch provides a smooth, linear throttle curve. It offers enough "bite" for cruising and light cinematic maneuvers while remaining incredibly quiet—perfect for neighborhood flying.
T-Mount Versatility: Designed with a standard 5mm screw spacing, these props can be press-fitted for lightweight 1S builds or secured with M2 screws for high-speed 3S/4S configurations to prevent prop ejections.
Graphene-Infused PC: Gemfan uses a high-durability Polycarbonate blend that resists "nicks" from grass and small branches, ensuring the blades stay balanced even after minor scuffs.
Low-Vibration Geometry: 2-blade props are naturally more susceptible to resonance, but the Hurricane series is factory-balanced to ensure jello-free video, a must for drones using the DJI O3 or Walksnail Avatar systems.
FAQ: Top 5 Questions on Gemfan 3018 Hurricane
Q1: Why should I choose 2 blades over 3 blades for a 3-inch drone?
A: Efficiency is the main reason. 2-blade propellers have less surface area and drag, which reduces current draw from your battery. This results in longer flight times and a quieter acoustic profile, making them better for cruising and long-range missions.
Q2: What does "4L4R" mean in the product title?
A: This indicates the package contents. "4L" stands for 4 Left-hand (CCW) propellers, and "4R" stands for 4 Right-hand (CW) propellers. You get 8 propellers total, which is enough for two full quadcopter replacements.
Q3: Do I need to use M2 screws to mount these propellers?
A: For lightweight 1S or 2S "Toothpick" builds, a press-fit is usually sufficient. However, if you are running a 3S or 4S high-voltage setup on 1204/1303 motors, we strongly recommend using M2 screws to prevent the prop from flying off during high-throttle punch-outs.
Q4: Will these propellers fit the Emax Tinyhawk or Babyhawk?
A: They will fit the Babyhawk II HD if it has 1.5mm shaft motors. They are not compatible with most indoor "Whoops" (like the Tinyhawk III) as those usually require 1.6-inch to 2-inch propellers and have enclosed ducts.
Q5: Can I use these for aggressive FPV freestyle?
A: You can, but you will notice less "grip" in tight corners compared to 3-blade props. If you enjoy technical freestyle with lots of sharp turns, tri-blades (like the 3016-3) are better. If you prefer smooth, cinematic "flow" and long cruises, the 3018-2 is superior.
Expert Guide Question: Are you building a 1S sub-50g toothpick or a 3S micro long-range rig? Depending on your voltage, I can suggest the perfect Motor KV to pair with these props to ensure you don't overheat your ESCs!
