Seagull #GPK What it does ?
Seagull #GPK What it does ?
Seagull #GPK
Seagull #GPK is a high precision single band GNSS receiver that can be used as a navigation device for your UAV platform. It can operate in multiple modes, including RTK, PPK, and MB, to give you the utmost flexibility and precision for your UAV platform. When functioning as a BASE or ROVER configuration, #GPK is capable of logging data internally. It can also be integrated with #SYNC2 or other types of feedback loops from camera devices to keep track and record data based on shutter events.

Seagull #GPK is a high precision single band GNSS receiver that can be used as a navigation device for your UAV platform. It can operate in multiple modes, including RTK, PPK, and MB, to give you the utmost flexibility and precision for your UAV platform. When functioning as a BASE or ROVER configuration, #GPK is capable of logging data internally. It can also be integrated with #SYNC2 or other types of feedback loops from camera devices to keep track and record data based on shutter events.
What it does :-
The device supports the following functions:
- BASE / ROVER ( #GPK can operate either as a BASE or ROVER )
- RTK ( Real Time Kinematic navigation rate – up to 8Hz )
- PPK ( Post Processed Kinematic navigation rate – up to 10Hz )
- MB ( Moving Baseline navigation rate – up to 4Hz )
- PVT GNSS ( Non-Kinematic navigation rate – up to 10Hz )
The device supports the following functions:
- BASE / ROVER ( #GPK can operate either as a BASE or ROVER )
- RTK ( Real Time Kinematic navigation rate – up to 8Hz )
- PPK ( Post Processed Kinematic navigation rate – up to 10Hz )
- MB ( Moving Baseline navigation rate – up to 4Hz )
- PVT GNSS ( Non-Kinematic navigation rate – up to 10Hz )
What it supports :-
The following hardware is supported Flight Controllers:
- Pixhawk 1
- Pixhawk 2.1
- Pixracer
- APM 2.6
- APM 2.5
Seagull:-
- #MAP-X2
- #RADIO
- #SYNC2
– all of the ardupilot based FCs’ are supported as well any FC that is capable of utilizing UBX/NMEA messages for navigation
The device has the following specifications:
- Ublox NEO-M8P-2 GNSS receiver
- Following signals supported: L1C/A, L1OF, B1I (GPS/GLONASS/ /BEIDOU)
- Refresh rate: up to 4Hz Moving Baseline, 8Hz Real Time Kinematic, 10Hz RAW (Post Processed Kinematic), 10Hz PVT (UBX Binary)
- Supply voltage: 3.9 – 12v (5v recommended – do NOT exceed 12v!)
- Current draw: 100mA AVERAGE
- Dimensions: 42.7mm x 44.5mm x 10.2mm
- Weight: 16g